This cable is designed specifically for quick and easy CAT control of the following Yaesu transceivers: FT-212H, FT-212L, FT-212RH, FT-215, FT-215H, FT-215M, FT-2200, FT-2312, FT-712H, FT-712L, FT-715, FT-715H, FT-715M, FT-7200, FT-5100, FT-5200, FT-6200, etc. An external power supply is not required. Simply hook it up to your computer. The power supply is done over the computer serial port, following the RS-232 specs. This cable is fitted with two 8-pin screw-on microphone plugs – one is female, another one is male. Both are wired in parallel through the special circuit. Female plug is connected to the radio’s microphone socket for CAT control via computer, and male plug is free to be connected to the microphone so that the user can use both – our interface-lead and microphone simultaneously.
You will find that when you purchase our programming cable you will possibly never need to replace it. This cable is extensively tested at time of manufacture to be free of defects. This cable does not include any manuals or instructions for use. Therefore, it will be assumed that the purchaser is knowledgeable in using the cable for the applications it is designed for. Please note that we supply the hardware only. We can not supply software - this is available from your local Yaesu dealer.
Product Code: CC11VM