SMA Female to SMA Female Adapter


  • Allows Male SMA Antennas to Fit Radio
  • Contact Material: Berillium Copper
  • Gold Plated Centre Contact
  • Impedance: 50 Ohm


SMA to SMA adapter is a coaxial adapter design with a 50 Ohm impedance.

This 50 Ohm SMA adapter is manufactured to precise RF adapter specifications and has a maximum VSWR of 1.2:1.

Fits many Baofeng, Woxon and Puxing radios & allows male SMA antennas to fit the radio.

You can use a small wrench to tighten this connector with the middle part.

The connector housing and pin in centre are made of pure brass to ensure a lower VSWR for higher transmission efficiency.

These adapters are really handy, especially if you have Baofeng radios as they have a male SMA on the radios and a female SMA on the antennas.


  • Material: Brass
  • Contact Material: Berillium copper
  • Socket Plating: Gold
  • Insulator: PTFE
  • Impedance: 50 Ohm
  • Frequency Range: 0 – 6 GHz
  • Insertion Loss: ≤ 0.15 dB / 3 GHz
  • VSWR: ≤ 1.2 @ DC – 3000 MHz
  • Insulation Resistance: 5000 MOhm min
  • Durability: ≥ 500 cycles